Anmol Chemicals is the pioneer manufacturers of Magnesium Aspartate & Potassium Hydrogen Aspartate Hemihydrate, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Magnesium Aspartate & Potassium Hydrogen Aspartate Hemihydrate made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Magnesium Aspartate & Potassium Hydrogen Aspartate Hemihydrate is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ---------- Contact

Drum PackingPalletized Drum PackingJumbo PackingPalletized & Shrink Wrapped. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina DubaiPotassium Hydrogen Aspartate Hemihydrate Manufacturers

Potassium Hydrogen Aspartate Hemihydrate BP & Commercial Pure Grade Manufacturers

Specifications of Potassium Hydrogen Aspartate Hemihydrate (YOU ARE HERE)

Potassium Hydrogen Aspartate Hemihydrate SDS GHS, MSDS Sheet

Potassium Hydrogen Aspartate Hemihydrate BP Ph Eur Grade Specifications
Ph Eur
C4H6KNO4,½H2O -- 180.2

DEFINITION
Potassium hydrogen (2S)-2-aminobutanedioate hemihydrate.
Content: 99.0 per cent to 101.0 per cent (anhydrous substance).

CHARACTERS
Appearance: White or almost white, powder or crystalline powder, or colourless crystals.
Solubility: Very soluble in water, practically insoluble in alcohol and in methylene chloride.

IDENTIFICATION
A. It complies with the test for specific optical rotation (see Tests).
B. Examine the chromatograms obtained in the test for ninhydrin-positive substances.
Results: The principal spot in the chromatogram obtained with test solution (b) is similar in position, colour and size to the principal spot in the chromatogram obtained with reference solution (a).
C. It gives reaction (b) of potassium (2.3.1).

TESTS
Solution S: Dissolve 2.5 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 6.0 to 7.5 for solution S.
Specific optical rotation: + 18.0 to + 20.5 (anhydrous substance).
Dissolve 0.50 g in a mixture of equal volumes of hydrochloric acid and water and dilute to 25.0 ml with the same mixture of solvents.
Ninhydrin-positive substances: Thin-layer chromatography.
Test solution (a): Solution S.
Test solution (b): Dilute 1.0 ml of solution S to 10.0 ml with water.
Reference solution (a): Dissolve 25 mg of potassium hydrogen aspartate hemihydrate CRS in water and dilute to 10 ml with the same solvent.
Reference solution (b): Dilute 1.0 ml of test solution (b) to 20.0 ml with water R.
Reference solution (c): Dissolve 10 mg of glutamic acid CRS and 10 mg of the substance to be examined in water and dilute to 25 ml with the same solvent.
Plate: TLC silica gel plate R.
Mobile phase: glacial acetic acid R, water R, butanol R (20:20:60 V/V/V).
Application: 5 μl.
Development: Over 2/3 of the plate.
Drying: In air.
Detection: Spray with ninhydrin solution and heat at 100-105C for 15 min.
System suitability: Reference solution (c):
the chromatogram shows 2 clearly separated principal spots.
Limits: Test solution (a):
any impurity: any spot, apart from the principal spot, is not more intense than the spot in the chromatogram obtained with reference solution (b) (0.5 per cent).
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 500 ppm.
Ammonium: Maximum 200 ppm, determined on 50 mg.
Iron: Maximum 30 ppm.
Heavy metals: Maximum 10 ppm.
Water: 4.0 per cent to 6.0 per cent, determined on 0.200 g.

ASSAY
Dissolve 70.0 mg in 5 ml of anhydrous formic acid, add 50 ml of anhydrous acetic acid.
Titrate with 0.1 M perchloric acid, determining the end-point potentiometrically.
1 ml of 0.1 M perchloric acid is equivalent to 8.56 mg of C4H6KNO4.

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.

Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO9000

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 31 December, 2021